Cherelle Fournier Desks April 07, 2018 22:25:57
Desk and Table Combinations: As mentioned above there are circumstances where more work space (or meeting space) is required. In this instance a combination of desk and writing or library table could be appropriate (or boardroom type table).
Desks to be seen from all angles: as mentioned above some desks were always designed to stand against a wall. The original cabinet makers therefore spent less time finishing the rear elevation of the desk sometimes even leaving it with relatively unfinished timbers. Other desks were however always designed to make an impression on anyone entering a room and facing the person sitting behind the desk. In this instance the "rear" of the desks would be highly polished panelled and often decorated or carved. Partners’ Desks also serve this purpose in offering an interesting and usable rear facade.
The increase of paper usage and correspondence prompted the need for producing more complex and specialized desks. Steel desks were introduced to take heavier loads of paper and withstand the pounding dished out on typewriters. Refinements to those first desk forms were considerable through the 19th century. The new desks can be transformed into many different shapes and angles which is ideal for artists.
All L shaped desks are absolutely not the same. Although the basic configuration is similar there is a great variety of these desks that vary in size and design. Here is a sampling of the choices available with L shaped desks.
However such a design is not suitable for desktop computer. If you will be doing your works mostly on a PC that has monitor keyboard mouse and CPU cabinet then you need a desk that can accommodate all these computer items. If you will be doing both paper and computer works on the desk then you need a design that will be suitable for both purposes.
Bible Box: This type of desk was small and originally meant for storing and using a bible. Rolltop Desk: A series of stacked compartments shelves drawers and the desktop surface can be covered by means of wooden slats that roll or slide through slots in the raised sides of the desk.